86-22-83973368
Room 903, Building 2, Haiyi International Building, No. 2, Rongyuan Road, Xiqing District, Tianjin, China (Mainland)
Steel Circular Wall Formwork
The metal forms shall be made from hot rolled steel plate with minimum thickness of 2.65mm.
The yield stress, ultimate tensile stress and elongation of the steel used shall be more than 245 N/mm2, 400 N/mm2and 25% respectively.
The yield stress, ultimate tensile stress and elongation of the U-clip shall be more than 245N/mm2, 400/mm2 and 25% respectively. The U-clip shall be galvanized by electroplated coating with minimum 8 microns thickness in accordance with BS1760 or approve equivalent.
The diameter of the U-clip shall be 13mm ±0.3mm. The shape and dimensions of U-clips to be supplied can be the similar as HDB’s existing stock or otherwise.
Flat Forms - These are used for forming plane surfaces. They are fabricated into rectangular panels of various standard widths and lengths.
| Code | Dimension (mm) |
| F3018 | 300*1800*55 |
| F3015 | 300*1500*55 |
| F3012 | 300*1200*55 |
| F3009 | 300*900*55 |
| F3007 | 300*750*55 |
| F3006 | 300*600*55 |
| F2018 | 200 * 1800 *55 |
| F2015 | 200 * 1500 * 55 |
| F2012 | 200 * 1200 * 55 |
| F2009 | 200 *900 * 55 |
| F2007 | 200 * 750 * 55 |
| F2006 | 200 * 600 *55 |
| F1518 | 150 X 1800 X 55 |
| F1515 | 150 X 1500 X 55 |
| F1512 | 150 X 1200 X 55 |
| F1509 | 150 X 900 X 55 |
| F1507 | 150 X 750 X 55 |
| F1506 | 150 600 X 55 |
| please contact us for more specification |
Inner Corner Forms - These are used for forming inner right-angled corners of a structure.
Code | Dimension (mm) |
CF0518 | 100 X 1800 X 150 |
CF0515 | 100 X 1500 X 150 |
CF0512 | 100 X 1200 X 150 |
CF0509 | 100 X 900 X 150 |
CF0507 | 100 X 750 X 150 |
CF0506 | 100 X 600 X |
Corner Angles - These are used for forming external angles by combining 2 flat forms into a right-angled corner.
Code | Dimension (mm) |
CA0015 | 50 X 1500 X 50 |
CA0012 | 50 X 1200 X 50 |
CA0009 | 50 X 900 X 50 |
CA0007 | 50 X 750 X 50 |
CA0006 | 50 X 600 |
L-Shape Forms - These are short inner corner forms for forming shot lengths of inner right-angle corners of structure. They consist of two form faces of various dimensions.
Square Corner Forms - These are used for connecting inner corner forms of L-shaped forms (S-Forms) at the intersection of 3 surfaces.
Code | Dimension (mm) |
S1515A | 150 X 300 X 150 |
S1515B | 150 X 350 X 150 |
S1515C | 150 X 400 X 150 |
S1515D | 150 X 450 X 150 |
S1515AA | 100 X 325 X 150 |
S1515BB | 100 X 375 X 150 |
S1515CC | 100 X 425 X 150 |
S1515DD | 100 X 475 X 150 |
Contact : Jane Lin
Skype: live:jane_4050
Websit :
Tel: +86(22)83973368-8009
Email : jane(@)tjtsxgroupe.com
Mobile/Wechat/Whatsapp/Viber:+86
Skan To Add My Wechat Skan to Homepage
Welcome to visit our factory at any time!
Variety of models can customize according to your specification requirement.
